Orders >$15 will ship with full tracking from the US to domestic destinations and USPS ePacket countries (most of Europe, Brazil, Russia, Japan, South Korea, Singapore, Hong Kong, Israel, Australia, New Zealand).

Shared boards by: ncross

Search shared boards:
lighting module boardhouse files

lighting module boardhouse files

Created by ncross on 2019-09-22 06:48:22

2 Layer Board - 4.9969 sq in (1.2480in x 4.0039in) / 3223.8 sq/mm (31.7mm x 101.7mm)
$18.94 per set of 4 ($3.79 per sq in)

This is a board to a lighting module that uses an Arduino mini to monitor multiple motion sensors and fade lights on and off as required.

License: CC-BY 4.0

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

lighting module boardhouse files

lighting module boardhouse files

Created by ncross on 2019-09-22 06:40:59

2 Layer Board - 4.9969 sq in (1.2480in x 4.0039in) / 3223.8 sq/mm (31.7mm x 101.7mm)
$18.94 per set of 4 ($3.79 per sq in)

This is a board that connects multiple PIR and a radar sensor and with an Arduino mini monitors the sensors and fades lights on when needed and off after defined time.

License: CC-BY 4.0

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

Raspberry Pi Power Supply Boards

Raspberry Pi Power Supply Boards

Created by ncross on 2018-02-18 03:15:42

2 Layer Board - 3.2838 sq in (1.9764in x 1.6615in) / 2118.58 sq/mm (50.2mm x 42.2mm)
$12.77 per set of 4 ($3.89 per sq in)

These connect to a standard switching power supply and provide decoupling capacitors and pinouts for shielded 3.5mm barrel connectors. They can be wired together to support multiple Pi's and can be chained by populating the 2.54mm screw terminal locations or soldering jumper wires between boards. An LED and current limiting resistor can also be populated to show the board is powered. Used this to distribute power to 15 Pi's used for home audio to power wired speakers in multiple rooms with Volumio.

License: CC-BY 4.0

1 person has said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.