PCBs.io now accepts Bitcoin!

Shared boards by: UniquePete

Search shared boards:
100 x 68 Enclosure Prototyping Board

100 x 68 Enclosure Prototyping Board

Created by UniquePete on 2020-06-05 02:51:01

2 Layer Board - 8.0908 sq in (3.5433in x 2.2834in) / 5219.86 sq/mm (90mm x 58mm)
$29.37 per set of 4 ($3.63 per sq in)

A prototyping board to fit within a 100 x 68 mm enclosure, including 18650 and 14500 battery enclosure mounting points and solder-jumper isolation from GND + Vcc planes.

License: CC BY-NC-SA 2.5 AU
Project URL: http://digitalconcepts.net.au/pcbs/proto
Tags: prototyping, enclosure, 100x68

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

100 x 68 Enclosure Prototyping Board

100 x 68 Enclosure Prototyping Board

Created by UniquePete on 2020-06-05 01:27:35

2 Layer Board - 8.0908 sq in (3.5433in x 2.2834in) / 5219.86 sq/mm (90mm x 58mm)
$29.37 per set of 4 ($3.63 per sq in)

A prototyping board to fit within a 100 x 68 mm enclosure, including 18650 and 14500 battery (GND + Vcc plane), coupled side connection and Pi 0 standoff mounting points.

License: CC BY-NC-SA 2.5 AU
Project URL: http://digitalconcepts.net.au/pcbs/proto
Tags: prototyping, enclosure, 100x68

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

85 x 58 Enclosure Prototyping Board

85 x 58 Enclosure Prototyping Board

Created by UniquePete on 2020-06-05 01:19:50

2 Layer Board - 5.6202 sq in (2.9134in x 1.9291in) / 3625.93 sq/mm (74mm x 49mm)
$21.02 per set of 4 ($3.74 per sq in)

A prototyping board to fit within an 85 x 58 mm enclosure, including 14500 battery mounting points with solder-jumper isolation from GND + Vcc planes.

License: CC BY-NC-SA 2.5 AU
Project URL: http://digitalconcepts.net.au/pcbs/proto
Tags: prototyping, enclosure, 85x58

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

LoRaPi

LoRaPi

Created by UniquePete on 2020-05-01 08:35:11

2 Layer Board - 0.9505 sq in (0.8200in x 1.1591in) / 613.22 sq/mm (20.83mm x 29.44mm)
$3.80 per set of 4 ($4.00 per sq in)

A Raspberry Pi adaptor board for the HopeRF RFM95W and comptible modules.
v1.1 No functional changes. Board length reduced to 30mm, with some minor component rearrangements, to match the width of a Raspberry Pi Zero.
v1.2 No functional changes. Board length trimmed to allow it to be mounted immediately adjacent to another board on a standard 100 mil grid and the silkscreen modified to label the pins according to their RFM95W connections rather than their Raspberry Pi connections, these changes to allow the board to be more readily adapted to other, non-Raspberry Pi applications.

License: CC BY-NC-SA 2.5 AU
Project URL: http://digitalconcepts.net.au/pcbs/lorapi
Tags: iot, lora, hoperf, rfm95w, raspberry pi

1 person has said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

LoRaBB

LoRaBB

Created by UniquePete on 2020-05-01 08:33:23

2 Layer Board - 1.0500 sq in (1.0000in x 1.0500in) / 677.42 sq/mm (25.4mm x 26.67mm)
$4.20 per set of 4 ($4.00 per sq in)

A breakout board for HopeRF RFM95W and compatible modules.

License: CC BY-NC-SA 2.5 AU
Project URL: http://digitalconcepts.net.au/pcbs/lorapi
Tags: arduino@peteharrison.id.au

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

LoRaBBPi

LoRaBBPi

Created by UniquePete on 2020-05-01 08:30:24

2 Layer Board - 1.3100 sq in (1.0000in x 1.3100in) / 845.16 sq/mm (25.4mm x 33.27mm)
$5.24 per set of 4 ($4.00 per sq in)

A combination breakout and Raspberry Pi adaptor board for the HopeRF RFM95W and comptible modules.

License: CC BY-NC-SA 2.5 AU
Project URL: http://digitalconcepts.net.au/pcbs/lorapi
Tags: arduino@peteharrison.id.au

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.