Orders >$15 will ship with full tracking from the US to domestic destinations and USPS ePacket countries (most of Europe, Brazil, Russia, Japan, South Korea, Singapore, Hong Kong, Israel, Australia, New Zealand).

Shared boards with the tag: esp32

Search shared boards:
RJ-11 Sensor Breakout Board v1.1

RJ-11 Sensor Breakout Board v1.1

Created by thorrak on 2019-12-01 15:33:58

2 Layer Board - 1.9380 sq in (1.2370in x 1.5667in) / 1250.32 sq/mm (31.42mm x 39.79mm)
$7.66 per set of 4 ($3.95 per sq in)

RJ-11 Sensor Breakout

NOTE - For new builds, the use of the RJ-11 boards are not recommended. The RJ-45 boards are recommended instead.

This board is intended to allow for the DS18b20 temperature sensors (and optionally, door switch) to be connected to a PCB that is away from your main BrewPi controller, thereby allowing for the use of shorter temperature sensor cables - or for the placement of the sensor breakout inside your fermentation chamber if necessary. This breakout board is intended to be connected to the BrewPi controller via an RJ-11 straight-through cable.

Be very careful when choosing a cable to connect your sensor board to your BrewPi controller - not all RJ-11 cables are straight through

Temperature sensors are intended to be soldered directly to the board, and the door sensor can either be soldered directly to the board or can be connected via an optional screw terminal.

License: CC-BY 4.0
Tags: brewpi, rj-11, esp8266, esp32, fermentrack, thorrak

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

RJ-45 Sensor Breakout Board v1.1

RJ-45 Sensor Breakout Board v1.1

Created by thorrak on 2019-12-01 14:48:14

2 Layer Board - 1.9381 sq in (1.2370in x 1.5668in) / 1250.38 sq/mm (31.42mm x 39.8mm)
$7.66 per set of 4 ($3.95 per sq in)

RJ-45 Sensor Breakout

This board is intended to allow for the DS18b20 temperature sensors (and optionally, door switch) to be connected to a PCB that is away from your main BrewPi controller, thereby allowing for the use of shorter temperature sensor cables - or for the placement of the sensor breakout inside your fermentation chamber if necessary. This breakout board is intended to be connected to the BrewPi controller via an RJ-45 straight-through cable (i.e. Ethernet).

Temperature sensors are intended to be soldered directly to the board, and the door sensor can either be soldered directly to the board or can be connected via an optional screw terminal.

License: CC-BY 4.0
Tags: brewpi, rj-45, esp8266, esp32, fermentrack, thorrak

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

LoLin32-Lite-Lora

LoLin32-Lite-Lora

Created by hallard on 2018-03-27 22:43:32

2 Layer Board - 1.9849 sq in (1.9610in x 1.0122in) / 1280.58 sq/mm (49.81mm x 25.71mm)
$7.84 per set of 4 ($3.95 per sq in)

ESP32 WeMos LoLin32-Lite Shield for HopeRF RFM95 RFM96 RFM98 or RN2483/RN2903 Lora Modules

License: CC BY-NC 4.0
Project URL: https://github.com/hallard/LoLin32-Lite-Lora
Tags: lolin, 32, lolin32, lora, rfm95, rn2483, lorawan, esp32, lite, shield

9 people have said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

ESP32-NODEMCU-ADAPTER

ESP32-NODEMCU-ADAPTER

Created by xkremator0 on 2018-02-18 11:05:47

2 Layer Board - 1.7816 sq in (1.1920in x 1.4946in) / 1149.42 sq/mm (30.28mm x 37.96mm)
$7.04 per set of 4 ($3.95 per sq in)

Adapter for DoIt ESP32 DevKit to NodeMCU socket

License: CC-BY 4.0
Project URL: https://github.com/lyusupov/ESP32-NODEMCU-ADAPTER
Tags: esp32, nodemcu, softrf, esp8266, uav, flarm, nrf905, lora

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

LoLin32-Lora

LoLin32-Lora

Created by hallard on 2017-10-12 17:41:41

2 Layer Board - 2.0331 sq in (2.0110in x 1.0110in) / 1311.67 sq/mm (51.08mm x 25.68mm)
$8.03 per set of 4 ($3.95 per sq in)

ESP32 WeMos LoLin32 Shield for HopeRF RFM95 RFM96 RFM98 or RN2483/RN2903 Lora Modules

License: CC BY-NC 4.0
Project URL: https://github.com/hallard/LoLin32-Lora
Tags: lolin, 32, lolin32, lora, rfm95, rn2483, lorawan, esp32

2 people have said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.