Shared boards with the tag: buttons

Search shared boards:
Breadboard buttons (1x5)

Breadboard buttons (1x5)

Created by PhilboBaggins on 2017-12-11 13:06:02

2 Layer Board - 1.0861 sq in (0.8024in x 1.3536in) / 700.71 sq/mm (20.38mm x 34.38mm)
$4.34 per set of 4 ($4.00 per sq in)

Buttons and resistors on a breadboard compatible PCB.

While the button is not being pressed, the input signal (numbered 1 through 5) is connected through a resistor to the inactive (I) pin. When the button is pressed, the input signal is connected to the active (A) pin. This enables you to select whether the buttons are active high or active low (or anything else really) simply by connecting a different voltage to the active (A) and inactive (I) pins.

If you want the input to go high when a button is pressed (active high), connect VCC to the active (A) pin and ground to the inactive (I) pin. If you want the input to go low when a button is pressed (active low) connect ground to the active (A) pin and VCC to the inactive (I) pin.

License: CC-BY-SA 4.0
Project URL: https://github.com/PhilboBaggins/assorted-pcbs/tree/master/Breadboard%20buttons%20-%201x5
Tags: breadboard, buttons, prototyping

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.