Orders >$15 will ship with full tracking from the US to domestic destinations and USPS ePacket countries (most of Europe, Brazil, Russia, Japan, South Korea, Singapore, Hong Kong, Israel, Australia, New Zealand).

Shared boards with the tag: brewpi

Search shared boards:
BrewPi ESP8266 - No LCD v0.2

BrewPi ESP8266 - No LCD v0.2

Created by thorrak on 2019-12-01 22:06:20

2 Layer Board - 2.5554 sq in (1.7829in x 1.4333in) / 1648.64 sq/mm (45.29mm x 36.41mm)
$9.94 per set of 4 ($3.89 per sq in)

ESP8266 - Through Hole w/o LCD

This PCB is designed to allow connecting an ESP8266 to the other hardware necessary to run the BrewPi firmware and control fermentation temperatures for your brewery. This specific board was designed to use a LoLin D1 Mini ESP8266 microcontroller and integrate with a 2-channel relay board. It does NOT support an LCD screen. This PCB supports the use of dupont connectors for connecting the relay which allows for a much more compact design than if screw terminals were used.

This board does not have terminals for directly connecting temperature sensors - it is intended to have an RJ-45 jack soldered on, and then be connected to a separate RJ-45 sensor board via an ethernet cable.

License: CC-BY 4.0
Tags: brewpi, esp8266, rj-45, fermentrack, thorrak

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

BrewPi ESP8266 - LCD TH Dupont v0.2

BrewPi ESP8266 - LCD TH Dupont v0.2

Created by thorrak on 2019-12-01 21:21:51

2 Layer Board - 3.8706 sq in (1.8579in x 2.0833in) / 2497.16 sq/mm (47.19mm x 52.92mm)
$14.86 per set of 4 ($3.84 per sq in)

ESP8266 - Through Hole /w LCD & Dupont PCB

This PCB is designed to allow connecting an ESP8266 to the other hardware necessary to run the BrewPi firmware and control fermentation temperatures for your brewery. This specific board was designed to use a LoLin D1 Mini ESP8266 microcontroller and integrate with a 2-channel relay board and a LCD2004 IIC LCD screen. This PCB supports the use of dupont connectors for connecting the relay and IIC LCD which allows for a much more compact design than if screw terminals were used. This PCB uses a "SparkFun"-style level shifter module for handling the level conversion necessary to drive the LCD display.

This board does not have terminals for directly connecting temperature sensors - it is intended to have an RJ-45 jack soldered on, and then be connected to a separate RJ-45 sensor board via an ethernet cable.

License: CC-BY 4.0
Tags: brewpi, rj-45, esp8266, fermentrack, thorrak

1 person has said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

BrewPi ESP8266 - LCD TH Screws v0.2

BrewPi ESP8266 - LCD TH Screws v0.2

Created by thorrak on 2019-12-01 20:24:21

2 Layer Board - 4.3815 sq in (1.8579in x 2.3583in) / 2826.77 sq/mm (47.19mm x 59.9mm)
$16.82 per set of 4 ($3.84 per sq in)

ESP8266 - Through Hole /w LCD & Screw Terminal PCB

This PCB is designed to allow connecting an ESP8266 to the other hardware necessary to run the BrewPi firmware and control fermentation temperatures for your brewery. This specific board was designed to use a LoLin D1 Mini ESP8266 microcontroller and integrate with a 2-channel relay board and a LCD2004 IIC LCD screen. This PCB supports the use of screw terminal connectors for connecting the relay and IIC LCD which some builders find to be easier to use due to their larger size.

This board does not have terminals for directly connecting temperature sensors - it is intended to have an RJ-45 jack soldered on, and then be connected to a separate RJ-45 sensor board via an ethernet cable.

License: CC-BY 4.0
Tags: brewpi, esp8266, rj-45, fermentrack, thorrak

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

RJ-11 Sensor Breakout Board v1.1

RJ-11 Sensor Breakout Board v1.1

Created by thorrak on 2019-12-01 15:33:58

2 Layer Board - 1.9380 sq in (1.2370in x 1.5667in) / 1250.32 sq/mm (31.42mm x 39.79mm)
$7.66 per set of 4 ($3.95 per sq in)

RJ-11 Sensor Breakout

NOTE - For new builds, the use of the RJ-11 boards are not recommended. The RJ-45 boards are recommended instead.

This board is intended to allow for the DS18b20 temperature sensors (and optionally, door switch) to be connected to a PCB that is away from your main BrewPi controller, thereby allowing for the use of shorter temperature sensor cables - or for the placement of the sensor breakout inside your fermentation chamber if necessary. This breakout board is intended to be connected to the BrewPi controller via an RJ-11 straight-through cable.

Be very careful when choosing a cable to connect your sensor board to your BrewPi controller - not all RJ-11 cables are straight through

Temperature sensors are intended to be soldered directly to the board, and the door sensor can either be soldered directly to the board or can be connected via an optional screw terminal.

License: CC-BY 4.0
Tags: brewpi, rj-11, esp8266, esp32, fermentrack, thorrak

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

RJ-45 Sensor Breakout Board v1.1

RJ-45 Sensor Breakout Board v1.1

Created by thorrak on 2019-12-01 14:48:14

2 Layer Board - 1.9381 sq in (1.2370in x 1.5668in) / 1250.38 sq/mm (31.42mm x 39.8mm)
$7.66 per set of 4 ($3.95 per sq in)

RJ-45 Sensor Breakout

This board is intended to allow for the DS18b20 temperature sensors (and optionally, door switch) to be connected to a PCB that is away from your main BrewPi controller, thereby allowing for the use of shorter temperature sensor cables - or for the placement of the sensor breakout inside your fermentation chamber if necessary. This breakout board is intended to be connected to the BrewPi controller via an RJ-45 straight-through cable (i.e. Ethernet).

Temperature sensors are intended to be soldered directly to the board, and the door sensor can either be soldered directly to the board or can be connected via an optional screw terminal.

License: CC-BY 4.0
Tags: brewpi, rj-45, esp8266, esp32, fermentrack, thorrak

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

BrewPi Fuscus Board RJ-45

BrewPi Fuscus Board RJ-45

Created by thorrak on 2019-11-03 23:17:06

2 Layer Board - 3.9421 sq in (2.7660in x 1.4252in) / 2543.29 sq/mm (70.26mm x 36.2mm)
$15.14 per set of 4 ($3.84 per sq in)

Raspberry Pi BrewPi hat for Fuscus

License: CC-BY 4.0
Tags: brewpi, fuscus, rj-45, fermentrack, thorrak

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

D1 Breakout - LCD SMD Dupont RJ45 Logo v1.0

D1 Breakout - LCD SMD Dupont RJ45 Logo v1.0

Created by thorrak on 2018-03-22 04:00:29

2 Layer Board - 2.9532 sq in (1.7120in x 1.7250in) / 1905.29 sq/mm (43.48mm x 43.82mm)
$11.49 per set of 4 ($3.89 per sq in)

ESP8266 Breakout Board for BrewPi - SMD /w LCD & RJ-45 v1.0

License: CC-BY 4.0
Project URL: https://www.homebrewtalk.com/forum/threads/native-esp8266-brewpi-firmware-wifi-brewpi-no-arduino-needed.586476/
Tags: brewpi, esp8266, rj-45, fermentrack, thorrak

9 people have said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

RJ-45 Sensor Breakout v1.0

RJ-45 Sensor Breakout v1.0

Created by thorrak on 2018-03-22 03:18:39

2 Layer Board - 1.8241 sq in (1.2370in x 1.4746in) / 1176.84 sq/mm (31.42mm x 37.45mm)
$7.21 per set of 4 ($3.95 per sq in)

RJ-45 Sensor Breakout v1.0 for ESP8266-based BrewPi controllers

License: CC-BY 4.0
Project URL: https://www.homebrewtalk.com/forum/threads/native-esp8266-brewpi-firmware-wifi-brewpi-no-arduino-needed.586476/
Tags: brewpi, sensor, rj-45, fermentrack, thorrak

2 people have said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

ESP8266 Homebrewing Board

ESP8266 Homebrewing Board

Created by jangevaare on 2018-02-15 15:33:35

2 Layer Board - 3.1173 sq in (1.6670in x 1.8700in) / 2011.16 sq/mm (42.34mm x 47.5mm)
$12.13 per set of 4 ($3.89 per sq in)

A basic expansion board for Wemos D1 mini for use with Thorrak's ESP8266 BrewPi fork or BrewPiLess.

License: CC-BY 4.0
Project URL: https://github.com/jangevaare/Homebrewing-PCBs
Tags: esp8266, brewpi, brewpiless, fermentrack, wemos d1 mini, homebrewing

6 people have said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

Raspberry Pi Homebrewing Board

Raspberry Pi Homebrewing Board

Created by jangevaare on 2018-02-14 00:20:52

2 Layer Board - 3.0661 sq in (2.4490in x 1.2520in) / 1978.13 sq/mm (62.2mm x 31.8mm)
$11.93 per set of 4 ($3.89 per sq in)

A basic expansion board for Raspberry Pi, designed with homebrewing applications in mind. Can be used with CraftBeerPi, Strangebrew Elsinore, Fuscus, etc. Provides 8x 5V outputs, and 2x 1-wire inputs.

License: CC-BY 4.0
Project URL: https://github.com/jangevaare/Homebrewing-PCBs
Tags: raspberry pi, homebrewing, craftbeerpi, strangebrew elsinore, fuscus, brewpi

8 people have said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

ESP8266 BrewPi RJ-11 Sensor Breakout v1.1

ESP8266 BrewPi RJ-11 Sensor Breakout v1.1

Created by thorrak on 2017-10-20 02:37:22

2 Layer Board - 2.3735 sq in (1.1870in x 1.9996in) / 1531.29 sq/mm (30.15mm x 50.79mm)
$9.38 per set of 4 ($3.95 per sq in)

RJ-11 Sensor Breakout Board

Compatible with ESP8266 BrewPi Controller PCB

This board takes an RJ-11 input and breaks it out to screw terminals. It's an alternative to splicing RJ-11 cables to join with DS18B20 temperature sensors and reed switches for door sensors.

License: CC-BY 4.0
Project URL: https://github.com/thorrak/brewpi-esp8266
Tags: brewpi, esp8266, rj-11 breakout, fermentrack, thorrak

4 people have said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

RJ-11 - BrewPi ESP8266 D1 Mini SMD /w Dupont v1.1

RJ-11 - BrewPi ESP8266 D1 Mini SMD /w Dupont v1.1

Created by thorrak on 2017-05-07 23:10:35

2 Layer Board - 3.0366 sq in (1.6870in x 1.8000in) / 1959.09 sq/mm (42.85mm x 45.72mm)
$11.81 per set of 4 ($3.89 per sq in)

Note - This board is not recommended for new builds

ESP8266 Breakout Board for BrewPi - SMD /w LCD v1.1

License: CC-BY 4.0
Project URL: https://www.homebrewtalk.com/forum/threads/native-esp8266-brewpi-firmware-wifi-brewpi-no-arduino-needed.586476/
Tags: brewpi, esp8266, rj-11, fermentrack, thorrak

2 people have said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

RJ-11 - D1 Breakout - LCD TH Dupont

RJ-11 - D1 Breakout - LCD TH Dupont

Created by thorrak on 2016-09-11 22:27:17

2 Layer Board - 3.6666 sq in (2.0370in x 1.8000in) / 2365.54 sq/mm (51.74mm x 45.72mm)
$14.08 per set of 4 ($3.84 per sq in)

Note - This board is not recommended for new builds

ESP8266 Breakout Board for BrewPi - Through Hole & Dupont Connectors /w LCD

License: CC-BY 4.0
Tags: brewpi, rj-11, esp8266, fermentrack, thorrak

3 people have said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

D1 Breakout - LCD TH Screws

D1 Breakout - LCD TH Screws

Created by thorrak on 2016-09-08 03:34:45

2 Layer Board - 3.9366 sq in (2.1870in x 1.8000in) / 2539.74 sq/mm (55.55mm x 45.72mm)
$15.12 per set of 4 ($3.84 per sq in)

Note - This board is not recommended for new builds

ESP8266 Breakout Board for BrewPi - Through Hole /w LCD

License: CC-BY 4.0
Tags: brewpi, rj-11, esp8266, fermentrack, thorrak

5 people have said "Thank You" for this board.

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.

RJ-11 - D1 Breakout - No LCD TH Screws

RJ-11 - D1 Breakout - No LCD TH Screws

Created by thorrak on 2016-08-20 15:50:49

2 Layer Board - 2.2417 sq in (2.1870in x 1.0250in) / 1446.26 sq/mm (55.55mm x 26.04mm)
$8.85 per set of 4 ($3.95 per sq in)

Note - This board is not recommended for new builds

License: CC-BY 4.0
Tags: brewpi, rj-11, esp8266, fermentrack, thorrak

Say "Thank You"



Order Now

Top View - Complete Board

Top View - Complete Board

This is what your finished board will look like from the top.

Bottom View - Complete Board

Bottom View - Complete Board

This is what your finished board will look like from the bottom.